-
**Describe the bug**
Pulling from the grid when everything points to battery usage would be OK.
PredBat up to date
[appdaemon.log](https://github.com/springfall2008/batpred/files/13830518/appd…
-
I had a look at the REST output and under raw.inverter there is `temp_battery` and `v_battery` available, can these be added so HA can see them?
Would it also be possible to send the inverter temp, b…
-
Single AC3 Inverter Economy 7 setup no export.
When low power mode is selected it operates correctly but is sending repeated commands to the Inverter as shown in the GivTCP Log below. There are more…
-
As of this morning, I updated the firmware [D0.307-A0.307] on my Gen3 Hybrid inverter. I've been running my system with no issue for multiple months now, but as of this update, all states read as "una…
-
**Describe the bug**
When the mode is changed from say "Control charge & discharge" to "Control charge" and there is an active discharge action, that action is not interrupted.
**Expected behavior…
-
Firstly I should say I am not ruling out it being a Octopus or GivTCP issue as my OctoAid app is erroring when trying to load rates currently
however, started seeing these errors after the update o…
-
**Describe the bug**
Installed the predbat+appdaemon combined add-on to play with the install process.
Had stopped appdaemon beforehand.
On restarting appdaemon, predbat crashed with an errors:
…
gcoan updated
6 months ago
-
Splitting this out to separate request.
Please add support for Solax inverters.
I use https://github.com/wills106/homeassistant-solax-modbus for HA integration (also supports other brands of inverte…
-
I have a AIO unit which has a total capacity of 15.964 kWh but a usable capacity of 13.5 kWh. Currently the card lists the total and not the usable (which doesn't look to be listed in any sensor :( ).…
-
### System Health details
## System Information
version | core-2024.3.0b5
-- | --
installation_type | Home Assistant OS
dev | false
hassio | true
docker | true
user | root
virtualenv | fals…