-
Hola Juan Félix
.\HTU21D.cpp:108:10: error: no member named 'free' in 'mbed::I2C'
i2c_.free();
No existe este método en el API I2C de MBED
Alguna sugerencia ?
Un saludp
DG
-
This works fine if no SD card is fitted, showing a `/flash` directory with contents. If a card is fitted, the progress gets to 50% then stops.
-
I tried your HTU21D for both ESP8266 and ESP32. For ESP8266 worked fine but it failed for ESP32. I compared your code to that of Adafruit and I found that you use ".endTransmission(false);" instead of…
-
A print got aboard due to "Transition to shutdown state: MCU 'Host_rpi' shutdown: Unable write i2c device".
I have installed and using for more than a week now a HTU21D without any isssues. Today, du…
-
Hi,
It would be excellent to get CJMCU-8128 support to ESPhome, my new home will have a CO2 system installed and I would like to keep monitoring this constantly since new houses don't seem to have…
-
### Board
ESP32 Dev Module
### Device Description
* DevKitC
### Hardware Configuration
* Digital expander I2C PCF8574
* Display I2C SSD1306
* ADS1115_WE I2C
* A digital sensor (pro…
-
### Describe the bug.
EVERY transaction on the i2c bus MUST be wrapped with
```
furi_hal_i2c_acquire();
furi_hal_i2c_ACTION();
furi_hal_i2c_release();
```
Where ACTION = {device_ready, tx, rx…
-
Hi Peter!
Very nice work, but I'm a bit sad when start reading/testing uasyncio v3 code on my esp32. :(
Many docs are referencing and works just with pyboard, and I and many people do not have …
-
Quick question, as I didn't find anything suitable while browsing the playground: Did anyone already implement a plugin for a combined ambient light & proximity sensor, like e.g. CJMCU-9900 or VCNL401…
-
**Описание**
Датчик освещенности (OPT3001) воспринимается как датчик температуры и влажности (SHT31).
Если в Меге на этом порту выполнить `I2C Scan`, то показывается список:
```
Back
0x44 - SHT31…