-
When I run with cli_test hs2, there are some error like below:
`**Open On-Chip Debugger 0.11.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
In…
-
I get error:
Runtime Error: embedded:startup.tcl:60: Can't find C:\Users...\AppData\Local\Arduino15\packages\ZeroPi\hardware\samd\1.6.4/variants/zeropi/openocd_scripts/zeropi.cfg
in procedure 'script'…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
When running a Rust code in VM , it becomes hard to trace back to Rust code from ELF. With debugging information it can be done. However we must enhance our runner to understand debugging information …
-
when i was debugging the led blink program it raised following error during debug session when i press next/step command in gdb()
GNU MCU Eclipse OpenOCD, 64-bitOpen On-Chip Debugger 0.10.0+dev-00593…
-
Hi,
I was wondering if there are any plans for other FPGA ports. I'd mostly be interested in Zedboard and ZCU102.
In the past these ports (and softcores as standalone projects in general) have bee…
-
I'm confused about the following bit of the OpenOCD configuration in the README:
```
ftdi_layout_init 0x0078 0x017b
ftdi_layout_signal nTRST -ndata 0x0010 -noe 0x0040
ftdi_layout_signal nSRST -nda…
-
Per user report from https://community.platformio.org/t/sipeed-rv-debugger-lite/19784.
The Lite version seems to be very close to the normal version listed at https://docs.platformio.org/en/latest/…
-
MAX31855 via SD card port on LCD board?
aka. The RepRapDiscount Smart Controller (white PCB)
-
Add some benchmarks table, comparing the speed with other dongles.
With a versaloon stm32 and openocd, flashing a file can take a minute, while it takes 1s with an FT2232H.