-
After doing a full chip erase (either by calling board.flash.eraseAll() or by other means), pyocd is unable to communicate with the boards. An operation such as board.flash.init() will either hang …
-
Currently when pyOCD finishes basic_test.py it will program a new image to flash. Right now this image is determined by the processor type. The problem I'm concerned with is that several development…
-
Hi
machine: E102501
OS: win7
This problem occurs when new boards are connected to the jenkins slave:
simhug01@E102501 /c/develop/2212/work/mbed_usb_20150630
$ mbedls
Traceback (most recent call last…
-
Dear Professor Erich,
```
We downloaded and added your USB PE component (11/8/2015) into PE without using RTOS.
```
When using IAR compiled the PE generated C code, we got " "freeRTOS.h" not …
-
I'm not sure "unstable" is the right word. Maybe "unusable" would be more appropriate. I've now spent days attempting to debug my project, chasing a Heisenbug, only to discover that it has absolutely…
-
In the #52, it was proposed by @aethaniel , to have board definitions outside of the project_generator. Or at least to be able to pass the yaml record with board definitions for a project, then use th…
-
As I was testing the PR, I used KL25Z to export blinky project. The exported project has predefined Simulator. Once I set it to CMSIS-DAP, the default flash algo are used which are not correct. Receiv…
-
-
At line 127: http://developer.mbed.org/users/mbed_official/code/mbed-src/file/cc1c4962551c/targets/hal/TARGET_Freescale/TARGET_K20D50M/serial_api.c
uint32_t PCLK = (obj->uart == UART0) ? SystemCoreCl…
-
We are in a situation, where we would like to bring down the USBSerial device and bring it up again with a different VID/PID. However, it seems that just calling disconnect and delete on the USBSeria…