-
Wir können uns endlich einen Lasercutter leisten und sollten ihn langsam bestellen, damit wir nach dem Umzug bald loslegen können :-)
In #111 hatte ich den [Laserscript LS6090](https://www.laserscr…
-
If the front door is locked accidentally there is no way to get out of the space.
-
If the app is launched without the suggested settings (so no laser cutters are yet defined), then if one creates a single laser cutter afterwards, the laserDeviceComboBox is hidden while the selected …
-
In my case I want to figure out whatever is supposed to be able to connect to ATMSolutions C02 PRO35 MINI, using Linux 16.04.
I started from https://github.com/t-oster/VisiCut README
Found http:…
-
After writing the K40 driver for this project I started up meerK40t (https://github.com/meerk40t/meerk40t) which is it's own K40 laser software in python. During development though I realized there ac…
-
Hi,
An overscan option with a definable distance would make sense to get rid of the darker regions close to the border of an engraving.
Start a raster line with 0 laser power for like 3mm, start ra…
-
Not sure if this is exactly an issue, or if I should post this here but I will give it a go. For some reason there is no option to move the 0,0 point to any other position than top left. Unfortunately…
-
Hi!
I try to install player/stage on ubuntu v18.04.
http://playerstage.sourceforge.net/
But I can't because of its missing some package and I can't resolve it!
For example, impossible to …
-
I tried visicut 00eb2eb with visicam and realized the automatic photo refresh every 2 (?) seconds.
When I close the lid on our lasercutter, the camera can't take a picture anymore. After a short time…
-
I'm trying to cut an about 45 centimeter slightly trapezoidal shape on an Epilog Helix Mini 24. Cutting the long diagonal line creates an offset that depends on the speed of cutting. I'm suspecting an…