-
I have just purchased one of the LilyGO t-display S3 and was wondering if this project would work on it?
-
the instruction `modem.setNetworkMode(2);` at line
https://github.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G/blob/c163bb7a71e778d27053c550339a23bb8d7ebc03/examples/Arduino_TinyGSM/AllFunctions/AllFunctions…
-
Hello LiLyGO,
Today discovered that I can't use SPI_MISO on GPIO 38 and UART RX on GPIO 39 simultaneously.
I checked https://github.com/Xinyuan-LilyGO/TTGO-T-Display/blob/master/schematic/ESP32-TF…
-
### The problem
I use an external component to drive the e-ink display from the Lilygo-T5-4.7 board. Just using the `display` doesn't cause any issues. Even when the `i2c` component is present. But…
-
Am using an lilygo t- beam board to transmit data to stm32f103c8 interfaced with rfm95 lorawan module(sx1276 chip) and it does not work while following keenly your tutorial video and using DIO0 and EX…
-
Please update T-Display-S3 Setup206_LilyGo_T_Display_S3.h. The local lack of definition of CS will cause some devices to not work properly.
[Setup206_LilyGo_T_Display_S3.h#L20](https://github.com/B…
-
PIO Core Call Error: "Error: VCS: Could not receive an output from `['git', 'branch']` command ({'out': '', 'err': \"fatal: detected dubious ownership in repository at '//us1/Q_Desk/MicroComp/GSM_SIM7…
-
Hi i'm using the latest version of tinygsm but i never get a gps position , i only get this:
![immagine](https://user-images.githubusercontent.com/62424179/200625061-95786356-bbde-4078-a713-63ba762cb…
-
The read me links to a lilygo product that looks like it is sold out.
Have you found a similar esp with lora onboard, hopefully with a similar protective enclosure?
-
Versions that run on
- Agon Light
https://www.olimex.com/Products/Retro-Computers/AgonLight2/open-source-hardware
- ESP32-SBC-fabGL
https://www.olimex.com/Products/Retro-Computers/AgonLight2/open-…