-
TLDR:
I have implemented a method to get LGSM alerts to be distributed via the MQTT protocol.
I am looking for feedback on it , review the implementation AND on guidance on how to get it prepped f…
-
Please include the following information when submitting a bug report:
* Lopy
* Pycom MicroPython 1.18.1.r1 [v1.8.6-849-b0520f1]
EU868 Class A & C: works like expected.
AS923 Class A: works l…
-
SX1302 has certain propability less than 10% failed to tx packets. As the following log, the packet should be transmitted when 9:18:11, but it had been replaced by the packet should be transmitted whe…
-
#### Summary
When under significant load the application server reports dropping uplink packets as the buffer is full.
#### Steps to Reproduce
1. Send lots of uplinks using the simulator OR subs…
-
Hi everyone!
I'm working with lorawan-server about a some weeks, and uplink messages from device works fine.
I see "join" events and see correct uplink data in server web-interface (Frames) and in…
-
We are using Sentrius RG1xx LoRaWAN gateway with RN2903A(US) LoRaWAN modules mounted on IMP006 Board and Gotthardp LoRaWAN Network server.
Moreover, we send Confirm up-link messages to LoRaWAN netw…
-
**Describe the bug**
When I runt the LoRaWAN LCTT pre-certification tool the test TP_A_EU868_ED_MAC_BV_019 is supposed to trigger a LinkCheckReq command from the end device(DUT). The test fails due t…
-
Hi
It's possible to implement in the future GNSS on your loraserver ?
http://www.multitech.net/developer/software/mlinux/using-mlinux/gpsgnss-on-conduit/
It's a very interesting to use lora…
jot4p updated
5 years ago
-
Hi everyone,
I’m new in LoRaWAN technology, I’ve got my hands on a Kerlink Station Gateway that is connected to the Kerlink server (Wanesy managment center), I have access to the server so I can a…
-
Hi,
It's very common in new sensors send directly one downlink frame in order to configure the sensors (like https://www.nasys.no/ sensors)
This is necessery only one time, and I need to creat…
jot4p updated
5 years ago