-
### qmi was not starting but fix has now beeing merged
https://github.com/openwrt/openwrt/pull/13324
I've now a running 5G Hat integrated into my system. It's running very good over qmi with m…
dr-ni updated
11 months ago
-
Hello my friend
I use technicolor tg789vac v2
I have tested more than time and i don't understand this problem
The problem is when i use my modem with official firmware, all my devices rec…
-
Enter your choice: 1
An unexpected error occurred while listing audio devices: COM is not supported
======SIM7600G-H Modem Tool======
-
Hello, I am observing repeated failures trying to send a post request via SSLClient using my SIMCOM7600G modem with TinyGSM.
The most common and consistent error message:
```
[318168][E][ssl__cli…
-
Hello,
I'm working to create a software to send/receive audio/messages using DMR protocol.
Currently I arrive to do the RX/demod using a uggly flow graph (GNU Radio flowgraph (verry uggly and CP…
-
I have IOT2050 Basics FS:04 and 4G modem Huawei ME909s-821 .
Everything is running with Example Image V1.3.1.
The operation is correct. But after a few days working correctly on some devices, no…
-
Is there a list of available / compatible modems?
I have a Sentry Call Blocker that recently died and this project looks like an excellent replacement but finding a modem appears to be more diffic…
-
Hi,
This is a catogorie _wish_ issue. The goal is to have an in rust written kernel module that doesn't need (special) hardware
in the mainline kernel. Have a _rust kernel module_ that works…
-
I'm using this library inside an ESP32 freeRTOS project and found that the simple fact of doing a `modem.begin()` was making everything else (in other running tasks) to go much slower.
Following th…
-
The CMUX mode on the LilyGo T-SIM7670G S3 (SIMcom A7670G) doesn't seem to work.
I have some questions:
1. Can you confirm that this is a known problem?
2. Can this be solved with a modem firmwa…