-
I have some problems getting it working, but maybe I am just using it wrong.
I have a STM32F411 Nucleo board, so MPU should be supported to my understanding.
I set it up like this:
~~~rust
#[e…
ctron updated
3 years ago
-
http://www.amazon.co.uk/MPU-6050-6DOF-Gyroscope-Accelerometer-Module-Arduino/dp/B00COD97LY/ref=sr_1_1?s=computers&ie=UTF8&qid=1453656822&sr=1-1&keywords=MPU-6050
-
The MSS_MPU_get_failstatus function in mss_mpu header fails the compilation. Since the header is included in mss_hal.h, using that also halts all compilation as well.
The file that includes mpu hea…
-
- [ ] Get readings from MPU 6050 (Roll rate)
- [ ] Use Kalman filter to remove noise from MPU 6050 readings
- [ ] Make a PID controller
- [ ] Drive Dc motor to control reaction wheel
- [ ] Log tes…
-
Trying to build/run example code (Simple_MPU6050_Example or Simple_MPU6050_Basic_Example and probably the others) for PI PICO-W code compiles and downloads to target, but I2C is not working.
Serial…
-
````
#include "MPU6050/MPU6050.h"
const int MPU_addr = 0x68;
MPU6050_Base mapu;
int16_t data;
void setup() {
Wire.begin();
Wire.beginTransmission(MPU_addr);
Wire.write(0x6B);
Wire.w…
-
Hello,
First of all, thanks for the very detailed tutorials and explanations. Thanks to all the information available online, I was able to sucessfully build a firmware on our stm32h743 board that …
-
### Checklist
- [X] I've **checked both [open and recently closed issues](https://github.com/tetrio/issues/issues?q=is%3Aissue)** to ensure this issue is not already reported.
- [X] I am using the…
-
In cases where I display memory with limited accessibility (e.g. register area, limited via MPU, etc.) it can be quite annoying to always get error message during scrolling for memory that could not b…
-
I've been working with Contiki and CC1350STK for a while now. I was able to enable the WOM feature in the MPU 9250 driver in contiki by referring to the mpu driver in the ble-stack. Its working fine n…