-
#### Description
Add the support for the mcu RP2040 as weel as the Raspberry-Pi Pico board.
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interface…
tprrt updated
1 month ago
-
I've tried PPPwn 1.2.3 and 1.1.0 , i re-flashed the pico in between the downloads, Luckfox works normally on other PS4 models, except the Slims. In MobaXterm i used obtion b for the IPV6 since it ment…
-
It works! Thanks a lot! Though your project, I successfully ported LVGL on pico(RP2040). So I made this issue to express my feelings.
-
Besides #1796, I'm still having some issues building with bazel and LWIP. I'm writing down the results of what investigation I've done for either myself or someone else to follow up on later.
I thi…
-
hello, could someone help me? i was trying to reuse my rpi pico but, after flashing it jrunner doesn't detect it, how did i do wrong? hold on bootsel button and plug rpi into the windows pc, after th…
-
### The problem
esp32_ble_tracker cannot be used when sending a config to Pi Pico W, because it requires "esp32"
### Which version of ESPHome has the issue?
2022.11.2
### What type of installation…
-
the i75 display has a clear function.
https://github.com/pimoroni/pimoroni-pico/blob/main/micropython/modules/picographics/picographics.h#L88
Would be great to add a clear function to this lib :…
-
can you please add a diagram how this should be wired to turn off and on an external (not pico) mcu? like esp32 :)
-
Adam reports needing to use the 2068 reset button more with the current beta.
It sounds like the Pico boot time may be longer than v1.0.
Couple of thoughts:
- what's the absolute minimum boot up ne…
-
I have a Raspberry Pi Pico that is attached to a custom board I created that is running SMD sk6812 LEDs. Essentially, my board is working as a VU meter for audio. And the Pico is doing the calculation…