-
Hello. I have a problem about 'fix location'.
With bladeRF and gps-sdr-sim, it was successful to generate fake GPS signals as you can see below:
![screenshot_20180806-151006_gps test](https://us…
-
Greetings!
I am currently working on using the rtl_433 on an Adalm-pluto. Whenever I try to do so, there are times where the software pushes through and manages to decode signals. However, most of …
ghost updated
5 months ago
-
When I try to bump up the spreading factor to 12, I keep getting this error.
```
block_executor :error: sched: is requesting more input data than we can provide. ninput_items_required = 16392 …
-
**Hardware**
- CPU: i913900K
- RAM:32GB
- GPU: RTX4080
- SDR: LOCAL
**Software**
Windows 11 23H2 & DragonOS_FocalX_R35
**Bug Description**
The usrp b205 dll was compiled by you so that I…
-
Plutosdr's RF bandwidth filter is not automatically set to the sampling frequency value.Maybe a manual setting option can be added?
-
The signal receiving from the insat-3dr satellite in Windows 8.1.
I use a in C-band LNB-converter with LO=5950 MHz.
The received frequency is 4781.5 MHz, in the converter it's subtracted from the L…
-
SDRPlusPlus Version: 1.1.0
OS: DragonOS FocalX R35 x86_64
Host: ASUS TUF Gaming F15 FX506HF_FX506HF 1.0
Kernel: 6.5.0-27-generic
Shell: bash 5.1.16
DE: LXQt 0.17.1
WM: Openbox
CPU: 11th Gen Int…
-
Hello, sir which version of GNU Radio you've used for pluto_sdr?
-
I am trying to get a HackRF to work with GNURadio that comes in the RadioConda (02/07/2022 release) running under Windows 10.
With the Soapy HackRF Sink get the following:
File "C:\ATSC_Testin…
-
### Solution to issue cannot be found in the documentation.
- [X] I checked the documentation.
### Issue
I'm a conda-forge maintainer for `gnuradio`, and for a while I've been seeing reports …