-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
Stepper motors are noisy/vibrate at low, medium and high speeds (30mm/s, 60mm/s, 80mm/s, 120mm…
-
Adaptive bed mesh is a feature that allows the printer to only mesh the print area. If the user doesn't follow the directions and place the test object into the middle of the bed, the bed mesh area an…
-
Tried this 3 times now, on Prusa MK3S / MMU2S latest firmware.
Plugin version 1.01
octoprint 1.7.0rc2
The extruder temperature seems to go though the tuning process, but the BED tuning never ends…
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
MK4
5.1.0
Original
USB drive
The Y-axis cali…
-
I am having an issue with the firmware on your github. I cannot pass the y axis test on the startup wizard. I used the hex file from the firmware file on the Fysetc prusa mini clone plus github, downl…
-
**Printer type** - XL multitool
**Printer firmware version** - 5.1.0 release (original)
**Describe the bug**
If collision detection is disabled (which it is by default, and must be disabled for…
-
Please add timalepse to prusaconnect but make it like octolapse with each layer it goes of the print and makes the final result much more pleasant to watch. Also im not sure if its possible but please…
-
Please integrate with the Wyze APIs for camera support. A large portion of the community is using Wyze cams because they are cheap and high quality to monitor our Pursa printers.
https://support.w…
-
HI all anduino program is compatible with the printer da vinci 2.0 duo?
-
У нас появился 3d-принтер - Prusa-i3 (прошивка):
https://www.prusaprinters.org/prusa-i3/
https://reprap.org/wiki/Prusa_i3_Rework_Firmware/ru
https://github.com/prusa3d/Slic3r
Нужно его запустить…