-
With Sming 07ecd3bdf33f5b56ec1c32c9587df456ffaa4c07 (older too) Basic_Blink using ```HWCONFIG := spiffs-two-roms``` set in ```component.mk``` fails to run on the device.
At boot this happens:
```
…
-
I define the environment variables ESP_HOME=/opt/esp-quick-toolchain
and SMING_HOME = /Volumes/DEV-PART/iot/espressif/Sming/Sming
I follow the following steps in an attempt to build an example
…
-
Adding
> RBOOT_TWO_ROMS = 1
to makefile results in build failure:
> elf/bin/ld: cannot open linker script file rom1.ld: No such file or directory
-
Build, flash and Wifi capture portal OK.
HomeKit setup from iPhone OK.
Gets unusually low current temperature reading when I 'turn on' from Home app.
Can't change modes or any other controls.
S…
-
In the `c_cpp_properties.json` I have this includePath:
```
"includePath": [
"${ESP_HOME}/xtensa-lx106-elf/xtensa-lx106-elf/include/**",
"${SMING_HOME}/**",
…
-
I have problems to run programs on ESP8266-01 modules. None of my programs, which worked on Sming 3.4 not run with version 3.7.1. Of course I have modified it and succesfully compile, but module do no…
kwis2 updated
3 years ago
-
Thanks to @HomeACcessoryKid and GitHub, there is possible to update those devices that were stuck in an old HAA or RavenCore version because changes on GitHub servers.
I have released a special ver…
-
I see an option in setup page.
- What is it?
- What does it?
-
Hi there,
Since last update my -before totally functional- shelly1-garage door opener is giving false lectures from the close sensor. It warns perfectly of the "open state" but after 5 seconds retur…
-
Further to #1333 porting Sming to Esp32 (and other platforms) the next roadblock we're likely to run into is the use of partition tables. This is an ESP-IDF feature, provided for the *Esp32* and *Esp8…