-
**Describe the bug**
After adding a RGB led (common cathode) to custom-chip-analog example, the RGB led never lights for any voltage output.
**To Reproduce**
Modified custom-chip-analog example:
…
-
I have just purchased a new [Cocoon Connect LED Strip](https://cocoonproducts.com.au/cocoonconnect/smart-led-light-strip/) from Aldi and have successfully acquired the I’d and key of the device and se…
-
Hi Henner,
I just want to report that running your library on picore results in a perfect frame. No flickering or artifacts.
I had previously tried with raspberry-stretch lite and the realtime …
-
### Issue Description
I have a c2 pro rgb keyboard. When compiling the default keymap for this keyboard and subsequently flashing the compiled code into the keyboard, the indicator lights (num, caps,…
-
I have an RGB bulb and an RGB LED strip by the same manufacturer that don't match in color when using Kelvin values for min and max. They don't match even if I select prefer_rgb_color.
It would be …
-
**Panel description:**
LED P5 OUTDOOR RGB SMD2121 HUB75 64x32 1/8 Module
**Dimensions (in pixels):**
64x32
**Scan factor:**
1/8
**Chips on rear side:**
ICN2012, ICN2037BP, MW245B
![CHIPO…
-
### Describe the bug
Home Assistant Integration uses depreciated flags.
Deprecated flags [rgb, color_temp] used in MQTT JSON light config for handling color mode, please use `supported_color_mod…
-
### Govee Device SKU
H608D
### Govee2MQTT Version
2024.07.13-82ddc6e9
### Describe the issue
only half of the strip is addressable: H608D has 50 leds (10 segments 5 leds each) but HASS only sees …
do285 updated
3 months ago
-
hey there
i'm using rpi computer module
does any one test this library with rpi cm3
or it will work ?
-
### What happened?
Main issue
Controlling the RGB LEDs with LED driver 5110.40 (iluminize.js) is working fine but it's not possible to control the white LEDs of the RGBW LED stripe. The white LEDs…