-
```
What steps will reproduce the problem?
1. rc522_reader seems to "hang" after the first match of a id in
/etc/RC522.conf
2.
3.
What is the expected output? What do you see instead?
I would expe…
-
```
What steps will reproduce the problem?
1. rc522_reader seems to "hang" after the first match of a id in
/etc/RC522.conf
2.
3.
What is the expected output? What do you see instead?
I would expe…
-
Is it possible to change the LED's on and off with html string?
I want control the wordclock with my FHEM System.
-
### Describe the bug
I have discovered the switch from Pi's homegrown setup to DRM/KMS has some side-effects/regressions when dpms kicks in.
DRM/KMS turns off the DPI signals to the display (in th…
-
I'm using a Pi4 with Raspbian to stream RTSP from a IP camera. After a couple minutes
the display will freeze but I'm still able to query the player via DBUS.
omxplayer - Commandline multimedia pl…
-
I am using raspberry pi 3 B+ board, unable to read time and date from rtc register.....
I have added the dtoverlay in /boot/config.txt
added rtc-isl1208 in /etc/module
if i do sudo modprobe rtc-isl…
-
I tried sending data via the SMI interface to the cariboulite.
By reading the registers on the AT86RF215 modem I see that the TX interface (from rpi to cariboulite) is correctly configured and ready …
-
I propose to implement NTP server inside QGC.
Source of time would be GPS signal that QGC is aware of. If no GPS is available to QGC computer host, time can be taken from mavlink's GPS.
The purpos…
-
```
What steps will reproduce the problem?
1. rc522_reader seems to "hang" after the first match of a id in
/etc/RC522.conf
2.
3.
What is the expected output? What do you see instead?
I would expe…
-
```
What steps will reproduce the problem?
1. rc522_reader seems to "hang" after the first match of a id in
/etc/RC522.conf
2.
3.
What is the expected output? What do you see instead?
I would expe…