-
I am trying running **srsenb** with the timestamping driver, setting in **enb.conf**:
n_prb = 6
device_name = iio
device_args = context=usb:
Also changed prach_freq_offset to zero in **sib…
-
## Issue Description ##
[Describe the issue in detail]
Even after establishing the NAS security context (after NAS Security Mode Complete), srsUE accepts the plain NAS message. In other words, srsUE…
-
## Issue Description ##
5G SA srsUE runs and connects to Amarisoft gNB. As long as the connection stays active, data can be passed (ping and iPerf). Once the UE goes to RRC idle, I am not able to ini…
-
## Issue Description ##
I followed the guide to build srsRAN. When I run make test I get 8 errors regarding pdcch_test
## Setup Details ##
I have a fresh install of Ubuntu 21.10, running on l…
-
When using single antenna mode `-A 1`, LTESniffer seems to ignore `-a id=2` selection. E.g. with any SDR this happens:
`sudo ./build/src/LTESniffer -A 1 -W 4 -f 1869900e3 -C -m 0 -a "num_recv_frame…
-
## Issue Description ##
Connection over wire works but only the first time I attempt to connect UE and eNB. If I disconnect then reconnect all future attempts until I turn off everything for more tha…
-
## Issue Description ##
When running srsenb without sudo in a shell where `ulimit -r` is 0, the enb crash.
Specifically, it crashes on `pthread_join(*thread, NULL);`
https://github.com/srsran/srsRA…
-
## Issue Description ##
srsenb fails to start with error after updating configuration to support intra-end handover as specified in App note.
Error parsing Radio Resources configuration: ce…
-
Hello.
I have implimented senario as described.
have 2 openstack instance for user plane and control plane
open5gs-Up : 172.20.70.106
open5gs-CP: 172.20.70.126
all functions of open5gs run corr…
-
## Issue Description ##
The appnote specifies that the 5G SA UE is limited to 10 MHz. Is it only able to support 10 MHz, or can it also support 5 MHz?
## Setup Details ##
Changed working 10 MHz 5…