-
After resetting the SX1302 and calling "lgw_start" from the HAL library, the Service channel(IF8) of the SX1302 works fine. I want to change the RX SF&BW of the service channel (IF8) without resetting…
-
Packet Forwarder Region Changes and Restart Logic
@hotspot-maker,
To operate correctly on the Helium network, a Hotspot needs to use the appropriate frequency settings (also known as a band plan…
-
Hi,
I am a newbie in LoRaWan and I have a project that requires the sensor data to pass through one SX1320 to another LoraWan Gateway. Can I modify the code or settings to achieve this?
Sorry for in…
-
I am using Semtech LoRa® Corecell reference design V1.0 (which has SX1302 and SX1250) and testing Receive and Transmit examples. While receiving packets, packet information are printed on console whic…
-
```
packet-forwarder BALENA_APP=HELIUM-TESTNET
packet-forwarder DIAGNOSTICS_FILEPATH=/var/pktfwd/diagnostics
packet-forwarder AWAIT_SYSTEM_SLEEP_SECONDS=5
packet-for…
-
The CONFIG_OK, RX and TX LEDs are not lighting up. Is it not being done in code ? If not can you please suggest how it can be done ?
-
When installing inside of Docker, it would be much easier if the installer used cp if detecting localhost instead of scp. This would also make install scripts much easier to use. For example: https://…
-
I'm using STM32F407VGT6 to drive the sx1302.When i send the data(lgw_send()),enddev receives the data last time written into flash.This issue is also found in raspberryPi4.Scren shoots as flollw:
![微…
-
Where can we find details on how to control the registers that control the GPIOs.
My current interest in the three GPIOs 3, 4 and 5 for the LEDs, but have a wider interest to control all unused G…
-
Hello,
I would like to reopen an issue that was previously discussed at https://github.com/Lora-net/sx1302_hal/issues/28.
The issue deals with the mandatory temperature sensor required to make t…