-
## Ruyi version
+ [0.8.1](https://github.com/ruyisdk/ruyi/releases/tag/0.8.0)
+ [0.11.0](https://github.com/ruyisdk/ruyi/releases/tag/0.11.0)
## Logs
0.8.1
```
Choice? (1-29) 11
The d…
-
We have recently built your board, flashed the ESP32 and the Tang Nano. Although 4.4.6 appeared to flash the the ESP32 Module over USB successfully, when the ESP32 is in the board and connected to th…
-
**Describe the bug**
[15:45:37] WAYLAND_DISPLAY is not set, defaulting to "wayland-0"
[15:45:37] Wayland socket '/run/user/1000/wayland-0' doesn't exist; are you running a Wayland compositor?
- …
ghost updated
4 months ago
-
I can`t flash bitstream in impl/pnr using Gowin EDA Programmer and also openFPGALoader.
Using Official EDA, the tool says the Gowin device was not found.
Using openFPGALoader, this is the output…
-
Hi @KerJoe
On RTD2660, and with **TTL mode** , I try to get all RGB output normally HIGH while now they are normally LOW.
I am turning around since weeks now without finding a solution.
Could so…
-
Hi, it would be great if you could try it with a DVI PMOD too,
I made a 16-bit version (RGB-565) of the icebreaker-pmod that should be possible to handsolder.
https://github.com/jbilander/icebreaker…
-
Could you add the .fs file?
Additional question: Could you let me know the version of Tang Nano 20k?
example : please look at the captured picture.
![image](https://github.com/jabadiagm/MSXgoaul…
-
Hello,
Literally wonderful project you made!
Really appreciated to have a chance to enjoy your masterpiece!
By the way, I am not familiar with Gowin Programmer...
How can I program Wondertan…
-
I have a carrier board for the Tang Nano with MIDI IN and OUT. Unfortunately this collides with the Dual shock connector of the C64 core.
I still would like to see an option to use the MIDI ports in …
-
This thread is intended for discussions on how to get machines working with the generic small adapter board.
I don't intend to actually build such boards, as it should be fairly easy for anyone exper…