-
They are here! I just ordered a tube of 10 1624's and 1626's 14 and 20 pin respectively.
Let me know if there is anything I can test on my end.
I got them from Mouser.
-
Hi,
I have a T3216 that gets commands from an other T3216. Both are connected by PB2/PB3 (crossed).
If I switch off the power of one of them and turn the power back on the T3216 won't restart/re…
-
Hi Spence,
Setup:
`` ATtiny85 (optiboot, 8MHz)``
`` ATtinycore (1.4.1)``
`` attachPCINT(digitalPinToPCINT(_PIN_PB3), ISRgetByte, RISING);``
`` using builtin Serial @19200 baud (AI…
-
With 2.1.0 - F() once again turns the text it wraps into a PSTR cast to a __FlashStringHelper - It made me sad.... but we needed the library compatibility.... Now, how can we get that performance back…
-
Hello,
the baudrate minimum value is 2400bps@20MHz clock, internal (i need 300bps). If i choose a lower value the UART don't work on ATtiny404. at different values of clock the baurates are totally…
-
Hi, at this moment i am trying to play and understand this Tinny core world, thanks Spence to allow it to work with arduino.
Currently now i am testing it on the I2C bus, but a strange behaivour ha…
-
I'm not sure what I'm doing here, just started to play around with the comparator of my AVR128DB32. But I'm quite sure this isn't supposed to happen, as the AVR128DB32 doesn't have a PORTE:
`DxCore…
-
````
void RTC_init()
{
/* Initialize RTC: */
while (RTC.STATUS > 0 )
{
; /* Wait for all register to be synchronized */
}
RTC.CLKSEL = RTC_CLKSEL…
-
My thoughts were to use an external 32Khz clock and use the millis() function to do accurate time keeping for battery app. If i read the docs correct this could be a crystal with caps on the TX and …
-
I wonder if I'm working beyond my headlights. I see in the writeup of the megaTinyCore a statement that reads "This functionality will be made easier to use via the megaTinySleep library in a futur…