-
Hi Peplin,
Thank you for active work regarding Pygatt.
I'm trying to use this library instead of going through bglib to use the BLED112. However, I'm getting an error when I run the sample program, …
-
### Describe the issue you are experiencing
I'm running a HA Yellow with a BT/WiFi CM4.
After a non consistant uptime the internal Bluetooth adapter is stopping to work and the integrations fail.
6…
ghost updated
2 months ago
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I…
-
### The problem
Unfortunately I can't run webserver on Shelly Plus 2PM and also the cover works in strange way - the buttons work ok (module is connected to dual button UP/ DOWN), the secondary press…
-
[xGUI-Pro](https://aur.archlinux.org/packages/xguipro-git) 开发版 AUR 包
```bash
yay -S xguipro-git
```
由于源码问题,暂未修复,先打包了,后续不影响。暂未发布,暂时不提供发行版包
-
I have heard from other users who have updated their Fujifilm cameras that the remote has stopped working
Can this be corrected so to will work?
Adrian
-
Hi!
After many days working properly, I observed that after an energy cut off, the ESP can't read data from stove until the RS232 wire is disconnected and connected again. After that, it will work …
-
Hi and thank you for your work.
I have 10 LYWSD03MMC devices, I already flash 9 of them with this method but last one fails.
I tied to change the battery, reset GND+RST, sending the 0x56 command but…
-
### The problem
If esp32_ble_tracker and mqtt is enabled, application crashes with backtrace.
API Component (w/o mqtt) is working !
Version **2022.12.8** Feb 10 2023 is working !
Compiling wit…
-
Reading CO2:
Add below to Configuration.yaml
sensor:
- platform: mqtt
state_topic: "VENTILATION_GATEWAY/serialgw_CO2/CO2_PPM"
unit_of_measurement: 'PPM'
name: "CO2_PPM"
Set FanSpe…