-
I have a smart energy meter from my local power company that can be read through an IR interface. The IR interface I have has USB and is a simple USB to serial to IR converter. When I plug it into my …
-
Here is the Logs i found.
If I understand right, the driver did not recive any MQTT Updates.
He tried to auto-restart at 09:14 which failed.
My manual restart at 09:53 succeded.
```
2023-03-2…
-
The changeable "Name" of the bms-instance is resetted after a system reboot. Would be great if this could be fixed somehow...
-
Raymarine cannot cope with tanks with NMEA2000 device instances greater than 5. My setup is a CerboGX with a Tank140 and I have two tank level senders connected to the Tank140. Looking at the NMEA200…
-
**Describe the bug**
- Charge current limit is set according to SoC to 10Amps and is reported correctly by vrm (see screenshot)
- However battery gets charged beyond this limit of 10 Amps by the vic…
-
As the code is running on several devices would it be possible to run it at nanopi?
multi/easysolar GX.
It crash on :
file "/usr/lib/python3.8/site-packages/serial/serialposix.py", line 595, in re…
-
### Describe the bug
I just update from version v1.0.20230508beta to the last beta, rebooted and the driver is not loaded.
I then tried to start the driver manually with "start-serialbattery.sh"…
-
Hello,
I have setup a Raspberry Pi 4 with an 5,5" Waveshare Amoled FHD Display attached via HDMI.
I'm using VenusOS 2.9.2.
I got everything working, just the blanking isn't working.
Currently …
-
I'm using MQTT-device driver to integrate a three-phase hybrid inverter into my setup.
I have defined Ac/NumberOfPhases as 3
![image](https://user-images.githubusercontent.com/2293862/228748387-fb…
-
**Describe the bug**
JK-B2A20S20P initially connects fine after a restart of Venus OS. I can see it working briefly, but after a short time, it fails with following error in the logs:
```
@40000…