-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
This is on a voxelab aquila, with creality 4.2.7 board. it would happen in any similar machin…
-
### Description of the bug
The documentation [here](https://help.prusa3d.com/article/layers-and-perimeters_1748#seam-position) states that the "Aligned" option should arrange seams into lines. Howeve…
-
I have a Voxelab Aquila that's brand new got a CRtouch for it downloaded the 10x10 firmware for it for my G32 chip. Everything went great until I got to bed leveling. When I do manual leveling with pr…
-
### Description of the bug
When ironing is off, objects are printed normally.
When ironing is on, layers 8 and 9 have very slow printing moves (0.4mm/s?). Noticed only when printer looked like dead,…
-
### Application Version
5.1
### Platform
Windows 10
### Printer
Custom (Voxelab Aquila C2)
### Reproduction steps
1. Set build plate to 220x220x250
2. Imported stl to be printed (max dimension…
-
### Application Version
5.0, 4.x
### Platform
Windows 10
### Printer
Voxelab Aquila X2
### Reproduction steps
Slicing anything, then switching from a 3d preview then back to prepare, then slice…
Lrt19 updated
2 years ago
-
### Description of the bug
With some infill percentages and lightning infill, slicing hangs indefinitely at "Infilling layers" stage.
Some examples for infill values that work correctly:
20%
30%…
-
**Problem:**
After using Engine.createTextureFromKtx/jpeg/Png, I need to query the texture width and height so I can generate proper UV coordinates for font display.
**Proposed solution**
Expose …
-
Was going through the parts to print some out, but discovered a part that was not in the list of STL files.
 detailing a pinout for the SKR Mini E3 to use the stock display from my Ender 3 v2 on it, but I can't picture ho…