-
Could not detect the DGB tool path message appears in Exception Decoder Output window. IDE is 2.3.1, board ESP8266.
How debug output can be enabled? This could be helpful to find out such issures.
chked updated
7 months ago
-
When i try to compile with pin D4 as the DHT pin, it doesn't compile and complains:
Using library Wire at version 1.0 in folder: /Users/dyim/Library/Arduino15/packages/esp8266/hardware/esp8266/2.3.0/…
-
Hi and many thanks for this great RTOS with support for so many different boards!
I have just installed the Arduino IDE packages for the ESP8266, but my WEMOS D1 mini seems not to be supported ther…
-
Could you change the my-settings.lua file to support higher numbers of ws2812 leds for Operator and Stage lights?
E.g. increase the input checks to 30
-
Issue type: enhancement
- Board: Wemos D1 R32, Mega 2560
If the method `drawRGBBitmap(int16_t x, int16_t y, uint16_t *bitmap, int16_t w, int16_t h)` is changed to virtual, this allows *significa…
-
*Please make sure you're using the ESP-IDF version specified in the [README](https://github.com/shmuelzon/esp32-ble2mqtt/blob/master/README.md) file, any other version is not supported.*
**Describe…
ozett updated
2 years ago
-
First flashed the no LCD .bin image, the deauth attack shown 20pkts/s, then I tried to use the Arduino source; flashed it, no apparent problem, the web interface is responsive, the wifi scan get the s…
-
I have Paradox SP5500 panel which communicates with PAI via IP150+ module. Everything is fully working.
I wanted to replace the IP150+ module with wireless solution, so I have followed the guide l…
-
Can someone help with communication and adjusting the program to the Wemos D1 Mini? Below is my configuration, in the logs I have "inventer not found" error.
serial = &hardwareSerial;
// OK pe…
-
Great work on this stuff, really appreciate the work it is awesome.
In the latest version of the Wemos D1 mini they have removed the series resistor from the transmit line on the serial to USB IC. …