-
Thanks for this project! I don't have an Aquarea yet, but am considering it, and one of the factors is the possibility to control it programmatically.
Do you happen to have done more reverse engine…
ariep updated
4 weeks ago
-
Hi Arun,
first of all thank you for this great library! I absolutely love it.
I have used your "bulk_data_insert" example, adding "BEGIN TRANSACTION" / "END TANSACTION" and I am using a SPI SD c…
-
Hi, let me start by saying THANKS for your work! I was looking for an ESPhome based system to use with OpenTherm and this seems to be the one.
Honestly, I'm not sure how often you read these, so my…
-
**Describe the problem you have/What new integration you would like**
It would be great if ESPHome would support opentherm and directly integrate into Home Assistant
**Please describe your u…
-
I have a simple parent node connected to a root node sending a message on a regular basis using
esp_mesh_lite_try_sending_msg((char*)"rec", (char*)"rec_ack", 1, item, &esp_mesh_lite_send_msg_to_paren…
-
Please use this issue only for esp3d.io web site issue
for [ESP3D](https://github.com/luc-github/ESP3D) / [ESP3DLib](https://github.com/luc-github/ESP3DLib) / [ESP3D-TFT](https://github.com/luc-gi…
-
### What happened?
Simply updating to 0.15.0-b2 makes one of my panels no longer light up. I use GPIO 5 for panel 9 in a 2D matrix. Reverting back to 0.14.3 (or even 0.15-0-b1) fixes the issue. I use…
-
### What happened?
Figured I'd update my ESP-01S after not doing it for a long time and noticed that the webinterface won't load anymore. Takes a couple of seconds for the browser to grab the WLED ti…
-
The ESP32 D1 Mini pin labelled "TX" is GPIO03 (wrongly labelled on this PDF as GPIO01)
Yes, I know that the ESP32 GPIO pin 03 is "RX" - my guess is that the D1 board labelled "RX" as "TX" for wiring …
-
Hello.
I am not able to connect an I2C sensor (BME280) to the Heltec Wifi 32 Kit. I have connected the BME280 to Pin 22 => SDA and Pin 21 => SCL. But I get always the response "No I2C Device found". …