-
Hi,
using Raspberry Pi Zero with DHT11 sensor and I am observing this issue:
**"A full buffer was not returned. Try again."** after running `dht_simpletest.py`.
I edited values to match DHT11 an…
-
I wired [this](https://a.aliexpress.com/cbEiCZeHH) P4-2121-64*32-16s-hl1 panel (I believe it has an ICN2028BP chipset) and ran the demo scripts both as a chained 32x32 and as a single 64x32 but didn'…
-
Hi,
I am using a "Raspberry Pi 3 Model B Plus Rev 1.3" to drive a WS2812B LED strip (110 LEDs at the moment).
As you can see in the [video](https://www.youtube.com/watch?v=4rAIXHtioZM), the strip …
-
Hi,
right now the gpio.read function uses fs.readFile:
`fs.readFile(sysFsPath + "/gpio" + pinMapping[pinNumber] + "/value", function(err, data) {`
Is it possible to switch to fs.watch and raise the …
-
Hi,
I received the Pi2Media 502V2S Board and tried to get it working with the hdmi.sh script. I used it on Raspberry Pi2 with recent OSMC (raspbian basis) linux. Unfortunately this is not working. Th…
-
Doubt this was just me, but phyisical pin doesn't mean the same thing as "gpio"
I was trying to get this wired up and I went with "physical" 12 for the closed sensor. but that is gpio1
Anyways…
-
## User Story
As a hardware developer, I want to set up the Raspberry Pi and connect the sensors so that I can read data from the temperature, humidity, and soil moisture sensors.
## Description
…
-
# Describe the issue
No matter whether the checkbox "Audio Levels on Snapshots" in the Admin menu is ticked or not, sound card audio levels are set to 100% when loading a snapshot. Sound input and ou…
-
I am going to do something sort of similar to this but I am just going to go a bit easier ( for me ) route and use a Raspberry Pi that I already have doing some light controls and add a gate opening /…
-
Hi All - I have a Pi Zero, fresh Raspian lite build, followed the excellent tutorial on here but I can't get my 64x64 matrix working with the Adafruit Bonnet or direct wiring to GPIO. The panel was re…