-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the p…
-
Thank you for your work on this project, amazing and so useful!
I am experimenting with a couple different chips and your firmware.
I just flashed a generic LED strip controller ZJ-BWCE-RGBW V1.…
-
Hi,
is it possible to keep state on GPIO (at least pull-up/pull-down instead of strong drive) after entering HBN0 mode?
-
Hello, I need some configuration help on a Sonoff B05-BL bulb. It is a new bulb with DIY Mode. The used MCU is an BL602, the LEDs are driven by a BP5758D Chip. (I double checked that by opening the wh…
-
@sakumisue These are amazing chips that have been developed, glad to have stumbled across them. However, it seems like heavy documentation and development are missing of these chips.
Is there any …
-
#### Problem
- Clone chip repo to depth 1
```
git clone --depth 1 https://github.com/project-chip/connectedhomeip.git /tmp/connectedhomeip
```
- Shallow clone the submodules with d…
-
I tested with XT-ZB1 devkit from aliexpress with:
- csky debug server with HLK CK-Link Lite debugger
- csky debug server with Sipeed RV Debugger Plus (ck-link lite firmware)
- RV OpenOCD with Sip…
-
# Feature request
- Add support for flashing BL602 MCUs OTA if necessary. The webinterface implies that this is possible already, but I'm not aware of whether this is functional.
- Create a OTA `.im…
-
The readme says : " Chip Reference Manual and Chip Data Manual are listed on [document](https://dev.bouffalolab.com/document) "
When I go to the page, and then click a datasheet download link, it …
-
您好,我在使用示例文件applications/protocols/mqtt/tcp出现了报错
我用的mosquitto作为MQTT服务器
BL602开发板只能接受MQTT消息,无法发送消息。
如果使用MQTT发送消息,则会在mosquitto服务器出现“Client XX disconnected due to protocol error.”
不知道是否是MQTT版本问题?