-
Bootloader should have following features:
1. Erase/write SPI storage
2. Work with BT (e.g. receive updates)
3. Update the SW
4. Show update progress on the display (at least as a progress bar, bu…
-
**Is your feature request related to a problem? Please describe.**
Currently usage of bootloader is confusing and require 2 GPIOs which is quite a lot.
**Describe the solution you'd like**
FRST s…
-
if you run `oem set-production-mode` twice then bootloader mode crashes and the system reboots. I have included the pcapng file from when I ran the commands.
[oem set-production-mode0.pcapng.zip](ht…
-
Apparently never tested or so?
Setting MACHINE to "edm-imx6" or "wandboard-imx6" results in build failures.
First on u-boot setting, the override does not actually work, thus you get:
u-boot-tn…
-
Hi Team,
I am working on PIC32MK1024GPK1024 MCU and bootloader_apps_usb H3 demo.
When building application and bootloader (Loadable Project ) for **Release** Mode Works fine but got below error in…
-
**Describe the bug**
I successfully built an Alpine Linux shim, but it goes to a black screen, and does nothing.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to shimboot
2. Press…
-
Hello, I have black screen when I try to inject payload HEKATE 6.2 or 6.2.1 , no problem with HEKATE 6.1.1 or older.
New sd card tested, this is not the problem.
Even without sd card in the slot, wh…
-
### 重新生成refind
因为某些原因(主要是不能配置`kernel parameters`,我需要重新生成`refind`的配置文件。最主要的是
最后发现,原来是我屏蔽这部分内容,而改成了只支持自定义内容,所以这里重新整理一下
### 自定义配置修改
#### 分辨率
```
resolution 1024 768
```
* 不知道为啥当时选的是这个…
-
in order for nenuzhnix to be booted on real hardware a bootloader is required
for 0.1 release the requirements are the following:
- bootloader is not part of gnu project and doesn't have gnu req…
tpimh updated
3 years ago
-
I am looking into a CANbus bootloader and see that one was started a few commits back. What became of this, what issues came up?
mfvmx updated
4 years ago