-
Board|MCU|State|To-Do
-|-|-|-
8-Bit AVR boards, RAMPS, etc.|Arduino AVR|đź’šgood|
Due, RAMPS FD (v2.A!), etc.|SAM3X8E|💚good|
Duet Wifi + X5|SAM3X8E|âť“unknown|E3D Toolchanger on hand
Duet 2 Maestro|SA…
-
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner
self.run()
File "/home/arajguru/work/CCPlatform_Private/ccplatform/contrib/live_dat…
-
### Description
With the files from the bf_6axes_dev branch downloaded today, when specifying `#define NON_E_AXES = 4` or `#define NON_E_AXES = 5` or `#define NON_E_AXES = 6` only axes XYZ can be m…
-
@ApertureSecurity in diasurgical/devilution/issues/149 wrote:
> What libraries are you wanting to use? I was thinking SDL2 could be a simple library to use.
FWIW, I googled for DirectDraw-to-SDL…
-
The build is littered with compiler warnings. When compiling my updates, this makes it really hard to tell if I've introduced a new warning. #327 had them all fixed a couple of years back, but that …
-
I have some parts with very fine tolerances, and all the walls are coming out about .1mm too thick, with holes too small by the same amount. I have carefully calibrated the volume being output printin…
-
While commissioning my new machine I accidentally had the e-stop wired incorrectly (it is wired into the A0 reset input), so that it was giving the opposite signal. The result of this was that the mac…
-
In my latest pull from xchange the getExchangeSymbols call is removed.
This api call was for some time marked as deprecated. Advised was to use getMetaData().getMarketMetaDataMap().keySet().
But this…
-
when I run in command line mode, I get this error.
~/cnc/pycam$ scripts/pycam --export-gcode=test.ngc test.STEP
Enabled 8 parallel local processes
Traceback (most recent call last):
File "scr…
-
At Line No. 192: " Y"+String.format(fstr,(-yOrigin+yPerPixel*cp.control.getY(i+inc)))+
But should read: " Y"+String.format(fstr,-(yOrigin+yPerPixel*cp.control.getY(i+inc)))+
Is there any reason th…
ghost updated
6 years ago