-
Hello,
I have managed to add an HP Comware network device into the system polled with SNMPv2. However, unlike Cisco network devices, this device is listed as "Generic Device". I have uploaded via pas…
-
Hi guys!
I'm having trouble with a Comware SMB switch. It's a HP V1910-24G.
The system connects just fine to the switch, but it seems that it's not using the '_cmdline-mode on' command. All I got when…
-
`librenms version 2a2be95.`
Last month I've removed interfaces from a quota based bill, even without a valid port, the billing is showing 15GB traffic from Sept 1 - 7 th!!!.
The mentioned interfaces…
-
Hi,
I get the following error on Oxidized v0.24.0 when trying to pull configurations from a HPE Comware 7 device. `raised Timeout::Error with msg "execution expired`
Turning debug on gives me th…
-
Similar to #801 my new HP1920-16G is not recognized as a Comware device. The corresponding SNMP oid seems to be
`iso.3.6.1.2.1.1.1.0 = STRING: "1920-16G Switch Software Version 5.20.99, Release 1108
…
-
Can the detection be updated for HP1810 switches do they are not detected as Generic Device?
```
/usr/bin/snmpget -v2c -c COMMUNITY -Ovq -M /opt/librenms/mibs udp:HOSTNAME:161 SNMPv2-MIB::sysDescr.0…
-
DO NOT DELETE THIS INFORMATION.
> Please read this information carefully.
GitHub issues is for bugs, please do not post issues asking for help or how to do X, Y or Z.
You can use our irc chan…
-
Hi all, would it be possible to use the H3C MIBs for Comware OS devices? Looking in the os polling config (comware.inc.php), I see the line:
$hardware = snmp_get($device, 'sysObjectID.0', '-OQsv', 'S…
-
Hi,
I'm testing the last version of librenms (2016/02). When I try to add a new device with WebUI, nothing appears in the device list. Checking database logs, this request appears :
```
2016-02-25T…
-
First time trying to setup oxidized with a non cisco device. How do i get this to run with comware
Here's my config
```
username: admin
password: S3cr3tx
model: junos
interval: 3600
log: /…