-
I needed to comment out #include "cubecell_SSD1306Wire.h" and add #include "HT_SSD1306Wire.h" to get it to work with the V1.1 CubeCell HTCC-AB02S
-
I have been trying to use the RAK5146-226 both on a generic WWAN USB breakout as well as on a balenaFin with multiple CubeCells. However, the connection is extremely unstable - I cannot send a simple …
-
Processing cubecell_board_pro (platform: asrmicro650x; framework: arduino; board: cubecell_board_pro)
-------------------------------------------------------------------------------------------------…
-
hello
i have an error message with ttn console v3 with the payload formatters.
I use [CubeCell Capsule Solar Sensor] with CCS811B sensor
I used the file given on github at this address: CubeCell_Ge…
-
GPIO7, on the pinout says that it is battery test control. Is this capable of giving a reading on the battery level? Or is it for testing whether it is running on battery power?
-
Hi Jas, I uploaded to the new version of the Heltec CubeCell Helium mapper and my mapper stopped working.
It is always trying to Join even after receiving a request accept message.
Also the inte…
-
Hi,
After upgrading from asr650x@1.2.0 to asr650x@1.3.1 in plataformio, there´s one subdirectory called 'radio' inside 'lora' that´s missing. I can compile and link, but is there any hint how to re…
-
We weren't able to verify this library against a Tile with firmware v1.1.0. Please let us know if you successfully used this library with that firmware version.
-
Hi.
Thanks for your job!
I want to use the calibration.ino file with a CubeCell HTCC-AB02S board with your library HX711_ADC-1.2.7
But I have the issue on Line 44: LoadCell.start(stabilizingtime, _…
-
I noticed that when waiting for it to join, the timer on the display will sometimes skip seconds. Like it will go "1s, 3s, 4s, 5s, 7s..."
It seems the display isn't updating often enough. The issue…