-
Hi all
First of all, thanks for sharing this repo on Github
I have a NUC nuc8i3beh with i3-8109U CPU @ 3.00GHz, 16GB ram and SSD and NVME installed
I have installed from your repo Ventura an…
-
-
https://github.com/RaphProductions/macOS-t460/assets/135860662/f7e44174-bc9e-4412-9109-8416754982f2
you see it here
-
Hi,
I have just upgraded to macOS 10.15 and it seems yubico-pam no longer works for `/etc/pam.d/authorization` and `/etc/pam.d/screensaver`.
### `/etc/pam.d/authorization`
After the upgrade, …
-
Hi, I'm not new to hackintosh.
I've created the media with your EFI and BigSur installer, but when I try to boot from the pendrive the screen goes black with the underscore blinking.
I also updated …
-
Maybe is a stupid question, but, is I ant o use your EFI in a T7610, what I will nee to modificative ?
if is possible advice me please
-
这个路由器和新路由3配置差不多,能否适配一下呢
ddvcx updated
4 years ago
-
Kernel panics and can't boot to macOS Monterey without using **cpus=1** boot flag.
Some times it is stucked at Appleacpicpu processor "" local apic "" when booting the installer.
![IMG_20210610_…
-
First things first, touchpad is PS/2 and not I2C. Only the touchscreen is and works fine with VoodooI2C.
Using VoodooPS2Controller, touchpad works but lacks momentum. Can be fixed by increasing tou…
-
你好,我也有一台华硕CN62,按照你的efi文件安装了bigsur,系统偏好设置里面有两个网络连接(“以太网”和“以太网2”),我猜测是不是“以太网”是真正的有线网络(rtl8111网卡),另一个“以太网2”是给intel7260用的。
现在上网遇到比较奇怪的问题,必须把有线网的网线拔出,把“以太网2”手动设置IP,并且用heliport连接2.4gWiFi才能上网,使用5gWiFi的话显示已连…