-
Thanks a lot
urget help needed
**Describe the bug**
A clear and concise description of what the bug is.
> Mote that most *errors* are due to the input from the user, and therefore should be tr…
-
Hi! I try to port some code form an Arduino Nano to an Feather M0 Cortex. I run into a problem with the get and put function. Is it not possible to use?
I run with `#include `
```
void loadEEPR…
-
I'm feeding a Grand Central M4 500 Hz on D6 and it's returning 0 for the value.
```
Adafruit CircuitPython 5.1.0 on 2020-04-06; Adafruit Grand Central M4 Express with samd51p20
>>>
```
Test c…
-
When a solar charged device runs low on power, it dies. That much is unavoidable, but when the sun comes back and the LiPo recharges, the node stays dead, either because it is stuck in the bootloader…
-
Re:
https://forums.adafruit.com/viewtopic.php?f=63&t=149682
Can recreate with following:
```python
Adafruit CircuitPython 3.1.2 on 2019-01-07; Adafruit Metro M0 Express with samd21g18
>>> impor…
-
According to [this page](http://elm-chan.org/docs/mmc/mmc_e.html), when communicating with an SD card in SPI mode,
> A pull-up on the DO (MISO) cannot be omited, or some cards will fail initializat…
rgov updated
6 months ago
-
This is an awesome project, thanks for all the work!
I was curious if it would make sense or be possible to route microcontroller pins to the audio in/out of the modules? My use case would be somet…
-
Hello Everyone,
Great library, and it has served me well over the past couple years. Thank you for your hard work.
I recently encountered an issue with my Adafruit Feather M0-based board (SAMD2…
-
- Arduino board: Uno, M0_Pro
- Arduino IDE version: v1.8.1 (and v1.8.7)
- Install Adafruit_SSD1306 via IDE Library Manager
The software SPI constructors work on a Uno when updating from v1.…
-
Hello Timothy,
We worked with your Sim7000 modules with the arduino mega, added someone of our code to interface with our servers and everything went well.
As soon as i switched the hardware to th…