-
With the following input
```
source, target, annotation
124825109, psn9, "Dennis Snower (GND PRESENT AND LINKED)"
170947386, phi58, "Christian von Hirschhausen (GND PRESENT BUT NOT LINKED)"
11400…
-
eXistDB-Daten sind noch nicht alle vorhanden. Events und Places fehlen komplett. Personen + Werke + Texte sind vollständig
Benötigt für Filtersuche (insbes. “Events” = Lebensdaten der Autoren).
…
-
I flashed the latest_en.bin to brand new nodemcu, entered wifi password and connected SEN55 to nodemcu board:
Pin1 - VIN
Pin2 - GND
Pin3 - D3
Pin4 - D4
Pin5 - GND
Pin6 - GND
and did the con…
-
Are pins in the schematic that are connected to say a DNP capacitor, connected to ground in the actual PCB, or do they remain cutoff? For example, there is a capacitor in series with a pin, and if thi…
-
## Hardware
* [x ] ESP8266
* [ ] ESP32
* [ ] Raspberry Pi
Modelname: _HM350_____
Retailer URL: ______
### nRF24L01+ Module
* [ x] nRF24L01+ you verified this is a **Plus model** capab…
-
I had had about 3-5 4chan from revisions E and older come back with dead 5V supply or strangely failing 5v supply.
Today's example: When the ECU is powered on after a long time of being powered off…
-
## Description
[The Generalized Nuclear Data Structure (GNDS)](https://www.oecd-nea.org/jcms/pl_37782/the-generalised-nuclear-database-structure-establishing-an-international-nuclear-data-standard) i…
-
Hello
got a board with V1.4 and flashed Tasmota 13.4.0 using the [Tasmota Web Installer](https://tasmota.github.io/install/) successfully.
Connected the USB to serial adapter board to 3.3V, GND, RX,…
-
Can an external trigger be implemented through GPIO, for something like a paddle switch or button or even PWM for full auto? I'm gonna wear out my ok button playing this game lol
-
Hi, I have a board marked "Heishamon OT v1.3". I mistakenly uploaded the wrong firmware ('large', when it should have been 'small'), and now the Heishamon no longer responds. I am now trying to fact…