-
How can I read/write on GPIO? I can't get it to work
-
Only certain pins can be latched during light/deep sleep. For example we would like to latch the PM sensor SET/RESET lines low while sleeping, but can't do it currently. Valid GPIO numbers are:
`0, 2…
-
**Project description**
An app for Raspberry Pi GPIO Output control and Input visualization, built in rust using the [Iced](https://github.com/iced-rs) GUI toolkit and [rppal](https://github.com/go…
-
I have this display: https://www.waveshare.com/wiki/3.5inch_RPi_LCD_(C)
I have OctoScreen running but when the screen goes into sleep mode (i adjusted disableblankscreen.sh), the backlite remains o…
-
@alees24 @marnovandermaas please note below.
Here's an outline of a design spec for the pinxmux work. Feel free to suggest different ways to build this, just wanted to get my view of how it would …
-
Hi,
Is it absolutely required to wire ground to pin 11 instead of pin 8?
I'm planning to wire small PI fan to 3v3 to force air into sensor and it would be neater to have it on pins 9 and 11 I thin…
-
Allow more flexible configuration of gpio and keyboard input to approve/decline images.
-
I'm trying to access the GPIO pins via the DIO input on IEI Tank 880. I've installed the mraa library as per the instructions provided in the repo. I have also loaded the _gpio_f7188x_ kernal which is…
-
Hello,
is the library also useable for fast inputs? Can you show an example?
Many thanks
Hans
-
[config.txt](https://github.com/user-attachments/files/16812974/config.txt)
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in…