-
**Bug description**
My Junkers FR50 thermostat cannot be controlled by EMS-ESP. Commands like temp and mode do not result in an actual change of the thermostat settings.
**Expected behavior**
Com…
-
From discord @tp1de requested to map the fields closer to the naming used on the km200 interface, which uses a path-like taxonomy.
I agree the names in the MQTT keys and the commands should match, …
-
Hi,
Since yesterday I can experience very strange results using RPI + HT3 together with Junkers heater.
Temp of water is reported correctly only in case the tap water is beying heat. The other p…
-
**Bug description**
Using current development builds (v2.1.1b1 or v2.1.1b2) Home Assistant integration of EMS-ESP devices behaves strange. The boiler's name and other meta data is not recognized and …
-
**Bug description**
I'm facing unknown devices discovered on the bus after connecting to a Junkers Cerapur Aero ZSBH 26-4 A23 (A hybrid device)
**Steps to reproduce**
Simply run a scan
**Expec…
-
**Bug description**
If ems-esp reconnects after the broker has been restarted, not all messages that should be retained are being retained.
I'm missing `status`, `heating_active`, `tapwater_active` …
-
Hi!
Currently I am using the hometop HT3 software for monitoring my Junkers heating system. Now i‘ve discovered this system and want to implement it with my HA setup too.
Has anybody managed to …
-
I recently bought an EMS interface board+esp32, I have a Junkers boiler. The connection is successful.
Previously, I controlled the boiler from HomeAssistant standart HVAC component via the EMS inte…
-
Hello,
I found 2 parameters in my thermostat that are not read in the EMS-ESP, and I found the locations in the telegrams.
Can you add the 2 parameters from the following telegram:
`(21:10:43) 88 0…
suysh updated
3 years ago
-
Hello there,
If use this boiler with external thermostat (Tado), what protocol are we use?
The Options:
![image](https://user-images.githubusercontent.com/14281430/95846280-8c26e680-0d4b-11eb…