-
### Checklist
- [X] I am not using Home Assistant. Or: a developer has told me to come here.
- [X] I have checked the troubleshooting section and my problem is not described there.
- [X] I have read…
-
It seems that **700-series sticks** (including the currently latest firmware 7.17) have some problems which mostly appear on networks that:
* are relatively busy (lots of unsolicited reports like m…
-
Hi, after 5 minutes of (admittedly sleepy) pondering, I figured out what each of the LED nodes is for. Thought I'd offer a couple changes for clarity. Obviously feel free to change anything if you end…
-
Hello! I'm not quite sure if this should be a zwavejs, zwavejs2mqtt, or HomeAssistant issue. Hoping someone can point me in the right direction:
I am running zwavejs2mqtt 6.7.4 with zwavejs 9.0.4…
-
My air purifier shows up just fine and I'm able to switch it on to specific states (auto and low, medium, high).
But I'm unable to turn the air purifier off or use more advanced functions.
It s…
-
### The problem
I am able to enter (via gui) an automation with this trigger:
trigger:
- device_id: 3cedfd47f99f11eaa53dadcfe5446957
domain: zha
platform: device
type: remote_but…
-
Hi,
Is it possible to add support for the 2x config button press? Thanks!
-
I'm using Home Assistant and ZwaveJS2QMTT. Whenever I put multiple values in for node/entity ID I get the following.
Example
Node ID "27,1"
Entity ID "light.bedroom_fan_lights,light.other"
Th…
-
### The problem
The Inovelli LZW36 light and fan controller has at least one missing feature in the current HA entity implementation. If you set the speed to 1, it will enable "breeze" mode. Since H…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within ZWaveJS2MQTT?
NO,…