-
On an example with simple lasercut box, you quickly hit 'too much recursion'
Unclear why this would be complicated.
Is there a way to program around this limitation. As the aim is lasercutting, havi…
-
@starno please add a file suitable for laser cutting the LCD cover to the repo. I'll order samples for this next set of prototypes.
-
4hp and 6hp blank panels with inverted logos are in `RebelTechnology/PowerBoards/drawings`.
Cut 1 or 2 each on orange frosted perpex.
-
...awaiting frosted white 3mm perspex.
At the same time, cut some blank panels (pending outcome of #27).
-
-
We use a LAOS retrofitted chinese copy of a HPC6040 and the cuts are working perfectly.
Unfortunately when we send an engrave job, it is squashed by about 93%.
Given that the steps per mm is right f…
-
When I set the jigsaw parameters and confirm (via "Apply"), I get this error each time:
```
File "Lasercut-jigsaw.py", line 38
If absolute is true - ensure random is only added to x,y """
…
tydyt updated
9 years ago
-
Elikkä ajatuksena olisi toteuttaa useana vuonna vuoden peliksi valittu kansainvälistä menestystäkin saaneen Katanin uudisasukkaat (Settlers of Catan) peliin laajennusosa 3D-maailmana. Ajatuksena olisi…
-
Right now we're using cut plastic sheet for the window. It may even be die cut with rivet holes (https://github.com/PaxInstruments/t400-enclosure/issues/50). It would be good to have an enclosure desi…
-
There are stress fractures on many of the joints so Max and I are concerned they'll snap right off