-
After a CTRL-C, the process is normally stopping. However, after termination of downstream thread, I get a seg fault. The forwarder has been compiled for an ARM Cortex-A5.
`
*** Multi Protocol Packe…
-
Gateway receives uplink ok at 865062500 but then transmits an ack at 865620000 when it should be the same as the Uplink frequency.
Could be misinterpreting the ack request from the LoRaWAN serv…
-
### Is your feature request related to a problem? Please describe.
My inverter is quite far away so I am not able to bridge the distance to my router with WIFI and NRF24L01+.
### Describe the solut…
-
Hi everybody!
I have Arduino Nucleo + sx1272 shield + Arduino_LoRa_Gateway_v2.ino = it works properly!
I have connected it with linux ubuntu 16.04 LTS in virtualbox (windows as host system), crossl…
-
When two gateways, connected to the same application server, are within range of each other, the web interface shows the packets are received on both gateways. When an uplink message is sent, the appl…
-
Hi,
If possibly, could you add separate tracker_0 and tracker_1 ID's for when having two receivers modules with different antenna's ?
Kind regards,
Ben
zanco updated
6 years ago
-
Hi,
When I try to go to admin page, it is required to login. May I know what's the defalt username and password. I have tried the default wifi or pi passwrod, not not work.
Thanks.
-
When the gateway is not equipped with a GPS module and is configured with `fake_gps: true`, the time information is not added to the "DeviceTimeAns" MAC command specified in [LoRaWAN 1.0.3](https://lo…
-
https://blog.hobairiku.site/2018/02/26/LoRa-Server-Project/#gitalk-container
LoRa Server Project 项目学习
-
你好，我最近也是在学习lora，我看了你的loraserver是接收gate的json格式的数据，你有没有相关c或者c++的gateway的程序，把rola协议解析成json协议发给你的这个loraserver