-
First of all, thanks for making your work public. Seems like it's the only repo providing some support for the WT32-SC01 dev board family.
I cannot build it with the latest ESP-IDF v5.0 though. Don…
-
Hi Lovyan, first of all, thank you for your great work on making this library. Was using the TFT_eSPI from Bodmer, thanks to him as well of course, but yours seems a bit faster and I love your analog …
-
### Discussed in https://github.com/arendst/Tasmota/discussions/18565
Originally posted by **Be-Virtual** May 3, 2023
### PROBLEM DESCRIPTION
Touch screen does not work on haspmota with …
-
I used DW1000.getTempAndVbat(temp,volt) to read value temperature and voltage but value not true
temp : -132.039993, volt: 2.513873
->> i think value voltage may be true, but value temperatu…
-
I am using a MakePython ESP32 from Makerfabs. I am trying to use the Streams-generator-a2dp example to connect with my AirPods and they seem like they are being recognized by the board, but don't conn…
-
Hi,
I'm currently using this lib and trying to init the touch device (based on FT6236) with LGFX as it seems to be supported in v1.
The problem is my touch device is using i2c, and neither with v0…
-
Hi
I've received my kit from Makerfabs today, flashed the firmware and connected to wifi. The unit appears to be working but the only colour displayed is red and the display is very dim.
Have I …
-
Hello
I have a TFT ILI9488 I have connected it to an ESP32 TTGO T8 1.7 as follows:
TFT ESP32 PIN
SCK 25
B/C 32
MOSI 33
RST EN (rst)
I have loaded the clock.ino example by changing t…
-
I just got the MakerFabs ESP32-S3 board with 16-bit parallel ILI9488 LCD. The demo sketch works to display the logo bitmap, but is very slow because it uses pushImage() to send each line of the BMP fi…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…