-
Hello,
I'm using MPU6050_6Axis_MotionApps20.h plus main lines of MPU6050_DMP6 to get roll out of the MPU6050. That works fine as long as pitch = zero. Code being that of the example:
```
…
bk4nt updated
5 years ago
-
I use the 18F4520 XC8 to run MPU0605 to get the following error
1. make[2]: *** [build/default/production/main.p1] Error 1
2. make[1]: *** [.build-conf] Error 2
`make -f nbproject/Makefile-def…
-
All axes always return to center.
I've tried all rotation options. Mine is a MPU6050
I repeated the entire process and still have the issue:
- Erased EEPROM and flash with avrdude
- flashed th…
-
The schematic here says that there's an MPU6050 connected to I2C2 on PB8/PB9, but this seems not to be accurate. For a start PB8/PB9 is I2C0 not I2C2, but more importantly there doesn't seem to be any…
-
When I use this MPU6050 library, STM32(Bluepill) does not work under the Arduino framework of PlatformIO ide.
I can find the address of mpu6050 through I2C detection program, but there is an error wh…
-
Hello,
Very small disclaimer before anything else, Iam new to embedded Rust and quite a novice at Rust all together.
I would like to use the max30102 on my esp32 alongside an mpu6050. I managed …
-
Add math to BMP280 and MPU6050 to get altitude and velocity.
Need math to check rotation?
-
I've been following the space mouse project for a while now and have learnt a lot of new things in this repo. Thanks to the author for this interesting and updated knowledge.
I have modelled a few of…
-
If you see source code for IMU you will see using DMP or raw data but none has given more realistic solution for applied project. I'm using raw data and I get offset when MPU6050 is set to measure +/-…
-
I am using the file
MPU6050_9Axis_MotionApps41
converted to python on the mpu9250.
In the fifo the data of the magnetometer are incorrect.
To have the data of the readings in the fifo I changed th…