-
### Platform
RaspberryPi
### Assembly
I did the assebly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection pictur…
-
Hello everyone!
I have successfully paired the hub and the controller to the mqtt topic (I have even unpaired the controller and have it only work through the Home Assistant automation (MQTT Forwar…
-
I know the 32u4 doesn't have a hardware encryption module, but could you use an external chip?
-
I am interested in using this library for a LoRa antenna tracker and that would require running two radios at once on two different SPI ports. I have looked into it, and it seems there is a way to do…
-
can't bind to car, i see on youtube t8sg on v202 bind to this car [https://www.youtube.com/watch?v=6ZRd13hvYt4](url)
Please help
-
I am rewriting my code for a masthead unit that sends back wind speed and direction and receives message to control the anchor lite over the air.
The current unit is nrf24 based. With code on the rpi…
-
## Hardware
* [ ] ESP8266
* [x] ESP32
* [ ] Raspberry Pi
Modelname: ______
Retailer URL: ______
### nRF24L01+ Module
* [ ] nRF24L01+ you verified this is a **Plus model** capable of t…
-
I am set up with your schematic and have checked it three times over and verified all the solder joints are good, I am not able to ever receive any signals from my keyfobs, Ive tried multiple fobs....…
-
Should be documented somewhere proper, but here is good for now. Feel free to add comments!
Existing for MQTT transport
* [mqttwarn](https://github.com/jpmens/mqttwarn) has tons of protocol brid…
-
Arduino IDE 1.8.6, MySensors 2.2, NodeManager 1.8, StampNode (Atmega328p), NRF24 SMD
When hooking up the SHT21 directly to my node's power and ground, I measured the sleeping current to be around 5…