-
### Target name(s)
ESP32-S3-ALL
### Firmware version
1.9.1.161
### Was working before? On which version?
N/A
### Device capabilities
System Information
HAL build info: nanoCLR running @ ESP32_…
-
Due to work done under https://github.com/kdschlosser/lvgl_micropython/issues/42 XPT2046 driver needs to be adapted to use new custom SPI implementation. Creating this issue as a place to track that p…
-
Hey everyone!
I've been pulling my hair out in few past days trying to get the display working, I have done it in IDF v4.4 (https://github.com/KamranAghlami/T-Display-S3.git) but for some reason I …
-
## Introduction
Rather than attempting to overhaul the existing SPI interface, adding a new MSPI API may be a better option for both new and existing users.
### Problem description
The existing…
-
--- WARNING: Serial ports accessed as /dev/tty.* will hang gdb if launched.
--- Using /dev/cu.usbmodem101 instead...
--- esp-idf-monitor 1.4.0 on /dev/cu.usbmodem101 115200 ---
--- Quit: Ctrl+] | M…
-
### The problem
There is an ongoing issue the the Espressif ESP32-S3 DevKitC 1 N32R8V board entering a reboot loop after configuration download or reset
I have tried all the YAML configurations …
-
As this project continues to grow, we increasingly are feeling a need for user-configurable features. IMO we have reached a point where we have outgrown Cargo features.
I believe that we need some …
-
Wolle,
Recall the intent was receiving BBC HLS M3u8 playlist of TS segments
I've built two identical radios'
Configuration:
ESP32 Devkit S3 N32R8
ILI9341
PCM5012
Max 98306
12V to 5V 5A D…
-
The latest version of ESP-BOX factory_demo on the stable wewrsion ESP-IDF 5.2.1 does not have enough interrupts.
The error occurs only when using the sensor cradle.
```
I (19) boot: compile tim…
-
### The problem
could not connect wifi when start up. Found "Brownout detector was triggered" in log then auto reboot again. continuely in the boot cycle.
### Which version of ESPHome has the …