-
Hi, please how can I write image to SPI flash from USB OTG port on odroid n2+ ?? because my spi memory flash was damaged and i haven't card sd now so is there any other solution to have petitboot agai…
-
I made an automation to send me a notification on my mobile when fridge and freezer tem get higher than a set temp. It seems not to work. I get no messages. When I do a manual test in Homeassitant it …
-
The error message:
linking YACReaderLibraryServer
/usr/bin/ld: uncompress-rar.o: in function `rar_parse_codes':
uncompress-rar.c:(.text+0x728): undefined reference to `Ppmd7a_RangeDec_Init'
/usr/b…
-
The Issue tracker is **ONLY** used for reporting bugs. New features should be discussed on our [Slack channel](https://ghostfolio.slack.com) or in [Discussions](https://github.com/ghostfolio/ghostfoli…
-
I update my Arduino to latest ( when follow instructions to install support for ESP32 boards), and do all that was in instruction.
When try to compile Hello World it fall with next errors:
```
…
sok63 updated
5 years ago
-
First of all, as usual, thank you very much @hexdump0815 for all the effort you are putting into your [custom stable mali kernel](https://github.com/hexdump0815/linux-mainline-and-mali-generic-stable-…
-
Previously I have been able to compile, install and bring up 8812AU adapters on raspberry pi devices. Recently I purchased an Odroid XU4 and tried to perform the same procedure. Compile works just fi…
-
### What version of Music Assistant has the issue?
2.3.2
### What version of the Home Assistant Integration have you got installed?
2024.11.1
### Have you tried everything in the Troubleshooting F…
-
Logging this here, because I have not seen this fail before and it is likely (very) intermittent only -- `TIMEOUTFAULT0002` got stuck on [this](https://github.com/seL4/seL4/actions/runs/7718784961/job…
lsf37 updated
9 months ago
-
1. https://odroid.in/ubuntu_14.04lts/ 에 들어가, 14.04.3lts 중 용량이 제일큰것을 받아주세요
2. https://www.balena.io/etcher/ 에서 학생의 윈도우 버전에 맞는 것을 선택해서 다운받아주세요
3. odroid - c1에 꽃혀있는 micro-sd카드를 리더기를 통해 컴퓨터와 연결한 후
4.…