-
Perhaps it is a good idea to have Opentherm Monitor compatability and have OTGW style serial reporting without parsing the Data-ID's. In other words, an option to enable legacy OTGW reporting over Net…
-
```
---> 6301732f4be4
Step 7/27 : ARG BUILD_ARCH
---> Using cache
---> 623f7c2c3f0d
Step 8/27 : SHELL ["/bin/bash", "-o", "pipefail", "+x", "-c"]
---> Using cache
---> 21c831cd8613
Step 9…
-
Thanks for again a upgrade, good work!
What I wonder is if it is necessary to always update mklittlefs while update OTGW-firmware.
I don't think so, only after updating to 0.7.2. Maybe you could m…
-
Hi, I have a BAXI RXM thermostat which is wireless and supports opentherm. I’m a bit confused about how to setup this up.
[This is the thermostat](https://mediacdn.baxi.pt/-/media/inriver-media/bax…
-
### The problem
First an overview of my setup: I've got an OpenTherm GateWay (OTGW) with serial support only. In order to make this network accessible I've attached a Raspberry PI to the serial conne…
-
I flashed latest version (0.8.1).
I decided to do a clean update, so erased the flash, flashed both files of the 0.8.1 using the command from the wiki.
Logged into wifi, configured wifi.
Rebooted…
-
Setup:
- Thermostat always sets DHW_ENABLE =1 within msgID = 0
- Through HW=0 configuration within OTGW, this behaviour is overridden towards the boiler.
Outcome:
- DHW_ENABLE = 1 published thro…
-
Hi,
I did fill by MQTT Home Assistant prefix: domoticz.
when I fill it with domoticz/in some messages are not updated. What is right to do. I can’t use the otgw mqtt plug-in because I have an use…
-
Hi @rvdbreemen,
After an OTA upgrade from v0.8.5 to v0.9.0 the Web server became very slow.
After disabling MQTT it got fast again. Re-enabling MQTT makes it slow again.
I've downgraded from v0.9…
-
While trying to enhance the iphone.html remote control for my thermostat such that it would also accept TC commands and have a "Resume Program" button, I noticed that the RoomRemoteOverrideFunctio…