-
I find the project quite interesting, but I am not sure if people have been successful implementing it and what are its main limitations.
- Will it work on the rpi 4?
- How does it relate to [Papp…
-
We are currently missing a standardized way to name our boards, symbols and footprints.
For the board part I was thinking about `_
-
**Problem**
I know that Inventree is more a storage management system and not MES (Manufacturing Execution System) however supporting build routing would add to it's trait I think in the build manage…
-
I was adjusting my K values for Lin_Advance, it was all ok, after the printer finish, I turn it off (after waiting nozzle go under to 60C).
Then I turn it on Again, start checking some configuration …
-
More of a long-term wish. This came up again and I finally found a library that appears usable for our purpose: https://github.com/stepcode/stepcode. Its license is 3-clause BSD and the build system i…
-
@freepdk
I have one of this little series that give VDD 5.00 butVPP 0.65 volts ( screen and measured)
last one give vdd 3.66 and vpp 7.73
Any suggestion what to check ?
Kind regards
-
Hello,
With your STM32F405 Feather Express card, the PB12 pin (cardDetect) is always to 0 (GND).
This is due to a short circuit with the card reader double pin 10
![cardReader_STM32F405-Feather-E…
-
I've soldered up one of these MCL64 boards, and am getting a black screen on power up on a 64. I programmed the Teensy successfully, and am certain there are no bridges (did the soldering under high …
-
# PCB 电路设计
>element14——[www.element14.com](http://www.element14.com/)
>SparkFun——[www.sparkfun.com](http://www.sparkfun.com/)
>CadSoft——[www.cadsoftusa.com/www.cadsoft.de](http://www.cadsoftusa.c…
-
Hi everyone, where can I get the PCB? Thanks in advance