-
Add in the ability to support rotations of 0 and 180. (Portrait mode)
-
The 2.8" Resistive and other touch screens need a old version of SDL. If this driver supports them we don't have to install very old software. But I don't have them. I only maintain 2.8" capacitive. B…
nift4 updated
2 years ago
-
Hello! i came across this page and i am wondering why my display is not working (ILI9341)
i have connected the D/C pin to 22 and rest to 3.3v
after running `sudo ./fbcp-ili9341` my screen stays w…
-
I have ili9341 installed on my pigrrl 2, which is using a Raspberry pi 3 and the piTFT display. Everything works perfectly apart from odd lag that happens occasionally. I think I've narrowed it down t…
-
Hi.
I am unable to get androidauto to open onto the LCD.
I boot the Pi, crankshaft loads and its shown onto the LCD but when i connect the phone nothing happens. But if the HDMI is plugged into the …
-
I'd like to use my Adafruit PiTFT without touch - is there any way to remove the touch functionality from the OS so it never gets instantiated?
-
https://github.com/nyxnor/onionservice/blob/d429606e546b65321ce8b7191cd23702f8871dbb/onionservice-tui#L70
**Issue**
It seems (I use whiptail instead of dialog) that the "2" representing two entrie…
-
Hi, I am trying to get this display to work in full resolution with the fbtft_device module, but I am having no luck. I tried these options:
1. ~~Use fbtft_device name=adafruit28~~
2. Use fbtft_devi…
-
**What doesn't work?**
When i click on some of the icons on main screen i must move away from the actual icon, a bit down and a bit to the side before it responds to right icon. A bit frustrated to "…
-
I've just installed the "PiTFT 2.8" capacitive touch (240x320)" display using the latest 2.1.0 script, the screen is working. But before I was able to turn the display on and off, using the commands …