-
### Is your feature request related to a problem? Please describe.
(Pylontech)-Battery is not shown with Home Assistant MQTT-Auto-Discovery
### Describe the solution you'd like
Add Battery s…
-
### Is your feature request related to a problem? Please describe.
Currently stopping of the charging is defined by voltage. As both the start and stop threshold conditions are defined in SoC %s, add…
-
### What happened?
Erkannte Entitäten mit einem Namen, der mit dem Gerätenamen beginnt:
![image](https://github.com/helgeerbe/OpenDTU-OnBattery/assets/126354867/dded7141-278b-4bcd-8e5e-0b51a9a9407…
-
Hi, ich versuche pin_mapping für Fusion Board mit einem SDM-Zähler über RS485 + JK-BMS + 1x Victron einzurichten.
Ich bin total verwirrt was die Pinbeschreibung angeht.
Da steht
https://github.co…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
Hi and thank you for this awesome project!
I bought a Huawei R4850G2 p…
eu-gh updated
7 months ago
-
Hello,
my PV works good wit SH10RT/Pylontec HA(newest) and your Modbus Integration.
I installed another PV System at Neighbore, also same Inverter/Battery and also a PI with HA(newest) and your
…
-
### FEATURE DESCRIPTION
I have the following screensaver config:
```
screensaver:
entities:
- entity: weather.home
- entity: weather.home
type: 0
- …
-
The default value of charge_v_factor = 2.0 didn't work at all for me (it actually went "full" power and caused cell 11 to hit OVP as usual).
When charge_v_factor = 3.0 instead it seems to work WOND…
-
### What happened?
JK BMS only shows 'SoC' and 'Manufacturer' in Home Assistant.
All other items are 'unbekannt'.
![public](https://github.com/helgeerbe/OpenDTU-OnBattery/assets/4160621/5d76c467-…
-
### Describe the bug
we have 2 batteries. a pylontech 9.6kw connected via can and a diy 9.6kw with daly bms connected via rs485 to usb on the rasperry pi
Venus is the current version 3.22
our e…