-
### Installation Method
Docker Installation
### AzuraCast Release Channel
Stable Channel
### Current AzuraCast Version
v0.20.2
### What happened?
During crossfades between a jingle and the next…
-
A user on community pointed out that chan_simpleusb does not have the ability to eliminate squelch tails. chan_usbradio has rxsquelchdelay which is measure in milliseconds.
Other implementations h…
-
### What radio module do you use?
nRF24L01+
### What driver board(s) do you use?
esp32-s3-devkitc-1
### If using Linux, what OS are you using?
_No response_
### If using Linux, what RF24 driver …
-
ft8con and ft8modem exist allowing direct encoding and decoding from a linux cli
https://www.kk5jy.net/ft8con/
since from what i understand the x6100 simply runs linux at it core it should be easy…
-
## Issue Description ##
When I try to launch my gnb with sudo gnb -c ./srsRAN_Project/configs/gnb_E316.yml, everything seems to launch correctly, but nothing is displayed when I use t and I get s…
-
## Current Behavior
I have a BetaFPV Super D receiver 2.4 GHz, using it in Diversity mode. It appears the receiver always locks on Radio/Antenna 2 and never switches to the other antenna, whatever …
-
## Issue Description ##
Dear srsRAN commity.
First of all I want to thank you for this wonderful project.
I've been installing srsRAN_4G from code with zmq as RF device and it's working great. Howe…
-
*Freddicus:*
Device: Netgear Nighthawk X4S (R7800)
Software version: OpenWrt 19.07.2 r10947-65030d81f3 / LuCI openwrt-19.07 branch git-20.134.55291-ba0fb08
Steps to reproduce:
- Start with the fir…
-
I'm using a Raspberry Pi 3B+ board with OpenWRT OS (v23.05.2) and trying to use a Semtech SX1302 LoRa Corecell interface board via USB interface to use them as a LoRa Gateway setup (RPi + Semtech SX13…
-
If you are in radio mode, when a new track starts, MusicBot should message the channel with the track details (so you can learn what's playing without needing to do a "list" command). Something simpl…