-
Hi, is it possible to configure the RAMPS 1.4 with your firmware to duplicate the output of motor X to E0 and motor Y to E1?
Just like on Marlin / Repetier firmware - `#define Y_DUAL_STEPPER_DRIVERS…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When reporting the sensitivity values using `M914`, Marlin uses the names `I`, `J` and …
-
We get a minute or two in to a print and the printer just stops and seems to try to reboot. Any ideas?
-
There's no option in the "Object Placement" Panel to print a particular STL file using a particular extruder. This exists in the windows version through a drop down menu that lets the user select the …
-
Hi guys, I know this is an old printer, but after flashing repetier on my 1.0a I've printed tpu, pla, petg and prints very well, I want to add a 2nd fan and I know there is and older post #152 about d…
-
https://github.com/luc-github/Repetier-Firmware-4-Davinci/issues/332#issuecomment-478231749
if the printer runs out of filament it should cool down using inactive time in eeprom. mine stayed on the…
-
Using Slic3r 1.2.9 when slicing files consisting of more than 10 extruders (Repetier-Firmware supports up to 16 virtual extruders for color mixing) via Repetier-Host then Slic3r sorts the toolpath as …
-
I have observed this on Cura 2.7:
- When the gcode flavor is Repetier, Cura sets the print / travel accelerations just once in the beginning of the file. If you use different accelerations for the di…
-
The program will open, but will freeze as soon as I try to connect.
Everything except the preferences seem to be disabled or will not respond to any input.
I see this is mac console
**\* -[NSLock lo…
spyle updated
11 years ago
-
Previously (0.92.x) there alsways has been a way to go back to the parent directory when in SD card browsing mode in LCD UI.
As of 1.0.x this possibility is - to my knowledge - gone. I can browser d…