-
Hi, i use the node.ino example of the RFM69 Library. But on compiling i got these error the obove error....
-
Is there any interest in the community about integrating Felix Rusu's RFM69 library into ESPEasy as a plugin to support the RFM69 family of radios?
Currently I have a dedicated ESP8266 (Adafruit …
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.0-rc.0-7-g6a07412b07 on 2024-03-11; Adafruit Feather ESP32 V2 with ESP32
```
This also happens with CP 9.0.0 final release.
…
-
I have a low-level hardware question for you. I'm just wondering, do you know if the board is able to run duplex (read & write at the same time)?
The ioctl I perform with the spidev version perfor…
-
Hi,
When I try to setup an Arduino + Ethernet Shield (W5500), i have the log message in the Serial Monitor, indicates to me that no Ethernet connection is detected.
************* WELCOME TO Open…
-
I'm trying to use an RFM69 module with a STM32G030F6P6 mcu, but it looks like there is some kind of issue when I'm trying to send a packet.
This is how I'm setting up the Radio (PA4 is the spi chip…
-
I believe GPIO Pin 25 has been miss labelled as GPIO 5 in your documentations (according to BOARD number 22 and fritzing diagram) within hookup page in the final column of your pinout page.
-
There's a fundamental contrast in the build flags between CircuitPython and Micropython seen here...
At https://github.com/micropython/micropython/blob/6e675c1baaf0de0d56a2345376d6b5600bfab3aa/py/m…
-
on Line 117 of **rfm69.cpp**
Replace This:
**_spi->begin(18,19,23,5);**
With This:
** _spi->begin(SCK,MISO,MOSI,SS);**
and Now its working with ESP32-S2 and S3 Boards. (Please choose co…
-
I'm testing Adafruit Feather M0 boards which consists of Atmel SAMD21 microcontroller and HopeRF RFM69HCW radio. My goal is a communication between two such boards at a bitrate of 1200bps.
The issu…